Leola Alvarado Car Seat April 15th, 2019 - 02:55:12
Many infant car seats come with a base for the car. You attach the base in the car and then you can just pop the car seat into it. This is nice because you don't have to mess with the seat belts every time you put your baby in the car. You have the option to buy extra bases to use if you have multiple cars. Some car seats can be put in with or without the base. That might be something you'll want to look for. Then if you ride with someone else you won't have to move the base out of your car to use in another car.
In the US, car crashes are the leading cause of death for children ages 3 to 14. While car accidents are usually unavoidable, what many parents may not know is that child injury during vehicle accidents can be significantly decreased or deterred by the proper use of car safety seats. According to the National Highway Traffic Safety Administration, 80% of all child car safety seats and restraints are used incorrectly; car seat manufacturer Clek puts this figure as high as 92%.
Let us start with the discussion about waterproof toddler car seat covers. It is noticeable now that the waterproof style of toddler car seat covers have already starting to win the hearts of a lot of Moms out there-in fact, this may been happening for quite some years already. Aside from being colorful, trendy, and now being a fun way of decorating the car, this car seat cover has also proven to be convenient and makes the cleaning of the car way much easier, too. What a Mom, especially a busy one, can do is to simply put the waterproof toddler car seat cover on top of the already existing covers and then you and your baby will be all set to go on your journey with the assurance that he will be safe and comfy along the road trip. There would be no struggling as you remove the safety belt and then install the waterproof one.
Evaluate your vehicle(s) to ensure that the bottom seat is flat enough to hold the car seat safely and that the seat belt is long enough to secure the car seat. There are usually two options of installation, long belt/short belt so make sure your car seat is equipped to do both if necessary. If you have a smaller vehicle make sure that the child will have plenty of head and leg room when the seat is installed in the forward-facing position, will he/she be able to kick your seat? Is there enough room for the car seat to be reclined? Minute details can be found in product manuals, you can access these product manuals for free on most manufacturer web sites. This will provide car seat measurements as well weight and height limits. It will also have installation directions, if it looks too complicated don't buy it.
This system is a major change from the days of using seat belts to tether the baby car seat in place. When using the LATCH system a few points would be useful to keep in mind. Make sure the provided seat belt is threaded correctly through the child car seat. Ensure that your baby seat is mounted in the recommended recline angle. You may need to probably apply some strength or even push the baby car seat with your knee to get it close to the back of the seat. This ensures there is no air trapped beneath the baby seat and the back of the car seat. A correctly mounted child seat will not bulge more than an inch either forward, backward or side to side.
Convertible seat. These seats can be rear facing or forward facing. These seats are the next stage for your baby after they've grown out of their infant car seat. The allowed weight ranges anywhere from 20-65 pounds. Remember, this is a product you'll be putting your child into everyday so there are lots of things to consider. Height and weight limits are often problematic because children usually tend to outgrow one limit before the other limit is reached.